Important Information:
*** NOTICE***
WILL ONLY SUPPORT OVER SIZE TIRES UP TO 35 INCH SPEEDOMETER
WITH SWITCH ON THE FLY!
This is a 5 position rotary switch you Must be mechanically experienced to install as we cannot help you with installation over the phone. Manuals can be found on FAQ page.
Tuner Description Below:
Custom Dyno Tuning For 2008-2021 Ford Powerstroke Diesel.
This is custom tuning built on the Dyno for your exact year of Powerstroke. This is just like EFI LIVE only with a monitor you can mount in your truck.
APPLICATIONS
F250, F350, F450 & F550 Trucks. For most configurations including cab chassis. Delete pipes and exhaust may require retrofitting on cab chassis trucks.
Tune Levels:
FORD POWERSTROKE 2008-2019 WITH SOTF SWITCH TUNE POWER LEVELS.
FORD POWERSTROKE TUNE POWER LEVELS |
Level 1 |
Level 2 |
Level 3 |
Level 4 |
Level 5 |
2008-2010 6.4L |
+0HP |
+60HP |
+100HP |
+160HP |
+250HP |
2011- 2021 6.7L |
+0HP |
+40HP |
+80HP |
+125HP |
+180 |
*Does not support changing tire size over 34s as factory Ford computer doesn't support bigger.
6.4L Power Levels.
Heavy Tow 60hp (150FT-LBS TQ)
Light Tow 100hp (230FT-LBS TQ)
Street/MPG 160HP (405FT-LBS TQ)
RACE 250HP (515FT-LBS TQ)
SOTF File for shift on the fly switch.
6.7L Power Levels
LEVEL 1 = STOCK 0hp
LEVEL 2 = Heavy Tow 40hp (110FT-LBS TQ)
LEVEL 3 = Light Tow 80hp (205FT-LBS TQ)
LEVEL 4 = Street/MPG 125HP (295FT-LBS TQ)
LEVEL 5 = RACE 180HP (410FT-LBS TQ)
SOTF File for shift on the fly switch.
*While towing, try to not race the truck or take off fast from a stop. Cold air intake is recommended for race level.
Additional Information:
Custom tune package includes Dyno Built Complete auto Transmission Tuning with Raised line pressure in all shifts to set it apart from other tuning options. This will protect your clutches and extend the life of your transmission.
Tuning is pre-loaded ready to go. No additional purchase or download is required. DPF delete files are in the custom tune section of the device.
Eliminate the following components (if equipped) without setting any diagnostic trouble codes or checking engine light
Diesel Particulate Filter (DPF)
Catalytic Converter (CAT)
Diesel Oxidation Catalyst (DOC)
Selective Catalytic Reduction (SCR)
Diesel Exhaust Fluid (DEF)
Exhaust Gas Recirculation (EGR)
Diagnostic Trouble Codes / Check Engine Light
X4/BDX/LIVEWIRE with custom tunes prevents any emission related DTC's or check engine light from setting. However, if some other issue comes up you will still be alerted. DTC's can be checked / cleared.
Fuel Mileage
Expect to see a significant fuel mileage gains. If your DPF is plugged up your probably averaging about 13-14 mpg. More or less depending on the severity of the restriction. After installing the SCT X4 / Bully Dog BDX and deleting the DPF/CAT expect to get a combined mileage of 18-19 mpg. Larger tires and poor driving habits will skew mileage downward.
** This is not the same tuner that commonly sells online. This tuner has custom programming which allows you to remove your emission components. **
TRUCK FITMENT YEAR RANGE
2008 Ford Powerstroke 6.4L
2009 Ford Powerstroke 6.4L
2010 Ford Powerstroke 6.4L
2011 Ford Powerstroke 6.7L
2012 Ford Powerstroke 6.7L
2013 Ford Powerstroke 6.7L
2014 Ford Powerstroke 6.7L
2015 Ford Powerstroke 6.7L
2016 Ford Powerstroke 6.7L
2017 Ford Powerstroke 6.7L
2018 Ford Powerstroke 6.7L
2019 Ford Powerstroke 6.7L
2020 Ford Powerstroke 6.7L
2021 Ford Powerstroke 6.7L
***NOTICE PLEASE READ***
OUR SHIPPING COST ARE PRICED FOR SHIPPING WITHIN THE UNITED STATES AND CANADA
ALL AIR SELECTED SHIPPING ORDERS SHIP SAME BUSINESS DAY IF ORDERED BY 2PM EST TIME AND GROUND ORDERS OR PROCESSED WITHIN 24 HOURS OF THE SAME BUSINESS DAY WHEN ORDER WAS PLACED.
YOU AS THE BUYER ARE FULLY RESPONSIBLE TO UNDERSTAND ALL RISK FOR ANY EXPRESS AIR OR GROUND SHIPPING DELAYS CAUSED BY WEATHER, STORMS, NATURAL DISASTERS, ACTS OF GOD AND THINGS OUT OF OUR CONTROL THERE ARE NO SHIPPING REFUNDS WITH EVENTS SUCH AS THESE.
(ALASKA AND HAWAII SHIPPING INFO)
MUST SELECT 2ND DAY AIR SHIPPING FOR ALASKA AND HAWAII ) (OVERNIGHT MAY NOT BE AVAILABLE FOR REMOTE AREAS AND THESES SHIPPING LOCATIONS WILL TAKE LONGER THEN STATED
LOCATIONS), AND SOME OF CANADA SHIPPING DUE TO EXTREME REMOTE AREAS MAY BE DUE TO EXTRA SHIPPING COST IF SO WE WILL NOTIFY YOU AND YOUR ORDER WILL SHIPP ONCE EXTRA SHIPPING COST IS PAID!
IF YOU WANT SOMETHING SHIPPED OUT OF THE COUNTRY, PLEASE MESSAGE US ON THE CONTACT PAGE.
RETURNS
1. Due to the nature and use of these items we generally do not accept returns as most items are vin number specific or built to order.
2. We will exchange only if the item is defective. We do recommend professional installation on this item. If the item is defective and cannot be exchanged or fixed a refund of the original purchase price will be issued after requested proof of malfunction and/or damage is given.
3. We do make certain exceptions on a case by case basis for returning products, if your return request is accepted, a 20% restocking fee* will be assessed and applied. Items must include all original packaging. Return shipping will not be refunded.3. All sales are final, any cancelations after order is placed, but before the item has shipped, will result in a 5% credit card/processing fee.
Before returning any items please contact us for specific shipping instructions at tech@elitediesels.com
4. Hard parts such as EGR kits, DPF Pipes/Exhaust, Pyro Kits, Throttle Valve Kits, Exhaust Tips & S&B Intakes are not eligible for return unless we make an exception and a 30% restocking/shipping fee will apply along with your return shipping cost.
2007.5-2021 DODGE RAM CUMMINS 6.7L | EZ LYNK TUNER WITH GDP TUNING | COMPLETE REPAIR KIT FOR EGR-DPF-DEF WITH UPGRADED PIPE OR EXHAUST SYSTEM AVAILABLE.
MBRP T304 STAINLESS STEEL 4IN EXHAUST IS THE HIGHEST QUALITY EXHAUST SYSTEM EVER BUILT. We carry 2011-2019 Ford Powerstroke 6.7L and 11-15.5 Chevy/GMC Duramax 6.6L. With the P1 Race Parts PRO Series Race Exhaust System. P1 Race Parts PRO Series Race Exhaust System is built from T304 Stainless Steel and comes complete with T304 Stainless Muffler and Tip. OEM style hangers and clamps for an easy installation. Does not rust or oxidize. Made from mirror polished T304 stainless steel (which lasts longer than aluminized exhaust), this kit also comes with a polished stainless muffler and exhaust tip.
Features:
Color Of EGR Kits May Vary.
WE CURRENTLY HAVE EZLYNK INSTOCK WITH THE LIFETIME AND 4WEEK LIMITED SUPPORT PACKS.
Vehicle Fitment:
2010 - 2021 Dodge Ram 2500/3500/4500/5500 Cummins Diesel 6.7L.
2008 - 2019 Ford F250/350/450/550 (650/750 ARE 199$ Additional) Powerstroke Diesel 6.4L & 6.7L.
2011-2016 Chevy 2500/3500 Duramax Diesel 6.6L.
2016-2019 Nissan Titan XD Cummins 5.0 No Egr Kit Available for these titan trucks.
10-21 DODGE RAM 6.7L Hp levels.
Power Levels (Emissions Removed)
10-21 Ram 6.7L
Level 1
Level 2
Level 3
Level 4
Level 5
+30HP
+50HP
+100HP
+150HP
+180HP
4wk Limited Support Package. Our limited support packs give you access to all tuning compatible with your vehicle for 4 weeks. This is convenient if you’re seeking a single tune to install on your vehicle. Once the 4 week expires the tune that is currently in your truck will remain. Upgrading to Full support will give you access to all tuning and software updates indefinitely.
Full Support Package offers unlimited flashes and basic tune revisions on ALL TUNES. You’ll receive automatic tune updates so that you can take advantage of the progress that we make and enjoy the timelessness of the EZ LYNK AutoAgent.
The SOTF Switch is needed to correctly run SOTF tunes. Without the switch installed, your tune will default to the lowest power level. Installing the switch will allow you to adjust power levels and maximize your vehicle’s performance instantly.
TCM Tuning will increase the line pressure in your transmission so it can keep up with all the added power your engine will be producing from the tunes. We highly recommend TCM tuning to anyone with a 68RFE that plans on running anything more than a tow tune. Please specify if you have any transmission modifications when ordering TCM Tuning!!
Year
Tune 1
Tune 2
Tune 3
Tune 4
Tune 5
2008-2010 6.4L
+0HP
+60HP
+120HP
+180HP
+240HP
2011-2014 6.7L
+0HP
+50HP
+100HP
+150HP
+200HP
2015-2019 6.7L
+0HP
+50HP
+100HP
+150HP
+200HP
2016-2019 Nissan XD 5.0L Cummins Power Levels:
Level 1
Level 2
Level 3
Level 4
Level 5
0HP
30HP
60HP
90HP
120HP
TUNE LEVELS:
2018-2019 3.0L Powerstroke
Emissions
Level 1
Level 2
Level 3
Level 4
Level 5
On
0HP
25HP
60HP
95HP
N/A
Off
0HP
25HP
60HP
95HP
120HP
Power Levels (Emissions Removed): 11-16 Chevy Duramax.
11-16 Chevy Duraamax
Level 1
Level 2
Level 3
Level 4
Level 5
+0HP
+50HP
+100HP
+150HP
+200HP
Setup instructions:
Living up to the brand name, EZ LYNK has made the installation process simple. We’ve broken down each step and provided some valuable information that will help you understand how your AutoAgent works.
Step One: Download & Install the AutoAgent App
The AutoAgent app is available for most smart devices. It requires iOS 8+ or Android 5+ to operate. You can download the APPLE IOS app here and the ANDROID app here.
Step Two: Create an Account
From the AutoAgent app, select ‘create an account’. You will need to verify that your email address is valid upon creation. Dealers should always create an account for the end-user or use the account that the end-user has already created.
Step Three: Place Your Key in the ‘Run’ Position
Turn your key all the way over without starting the vehicle. This will boot your vehicle’s engine computer allowing the AutoAgent to communicate with it. If you have a push-to-start vehicle, you should press the Start button twice.
Step Four: Plug the AutoAgent into your OBD-II Port
With the key in the ‘Run’ position, plug your AutoAgent into your vehicle’s On-Board Diagnostics port. You can verify that it has booted correctly when you see that a blue and green light are illuminating from the device.
Step Five: Connect to your AutoAgent from your Smart Device
Navigate to the WiFi settings of your smart device and select the ‘EZLYNK_####’ network. A check mark will appear next to the network name when you have successfully connected. The AutoAgent 3 also allows you to connect via Bluetooth.
Step Six: Open the AutoAgent App
After you’ve successfully connected, you can navigate back to the AutoAgent app. You should now be able to see your vehicle gauges.
Step Seven: Lynk your Vehicle
When you purchase from Elite Diesels or an authorized dealer, your vehicle will be AutoLynked. If your smart device has cellular data, you will notice that a message has appeared asking you to lynk the vehicle. Follow these prompts to connect your vehicle with your mechanic/technician. If your smart device does not have cellular data, you will need to connect to an internet available network and re-open the app to complete the lynking process.
Step Eight: Program Your Vehicle
After completing the lynking steps you are ready to flash your vehicle.
Navigate to > Vehicle > ECU Profiles. Here you can view the list of tunes or ECU profiles that are available to you.
Tap the button to download your desired ECU profile, followed by the ‘Install’ button to flash your vehicle. The app will guide you through the flashing procedure.
(When using a smart devices without cellular data you will need to switch to an internet available network to download the ECU profile, then back to the EZ LYNK network to install the ECU profile.)
Power Levels: 0hp up to 200hp+ Depending on truck and modifications.
Includes rotary switch to change power levels on the fly.
Unlock cable - Includes required unlock cable for Nissan pickup trucks.
INCLUDES DPF DELETE PIPE WITH OPTIONAL UPGRADE TO FULL EXHAUST IF NEEDED.
Optional EGR DELETE KIT IF NEEDED.
Diesel Particulate Filter (DPF) - The EZ Lynk is a DPF delete capable tuner. The DPF must be removed when installing the EZ Lynk. DPF Delete Pipe.
Catalytic Converter (CAT) - We recommend doing a CAT delete at the same time as the DPF delete.
Diesel Oxidation Catalyst (DOC) - If equipped, the DOC can be deleted.
Selective Catalytic Reduction (SCR) - If equipped, the SCR can be deleted.
Exhaust Gas Recirculation (EGR) - The EZ Lynk Auto Agent 3.0 will de-activate the EGR system. The EGR valve & EGR cooler can remain installed but unplug from any wiring harness or can be completely removed with an EGR delete kit. We recommend completely removing the EGR system but either option is available.
Diesel Exhaust Fluid (DEF) - 2013+ trucks in stock form require DEF. This will no longer be required when installing an EZ Lynk. The DEF tank can be removed completely or the wiring harness can just be unplugged.
Diagnostic Trouble Codes / Check Engine Light - The EZ Lynk Auto Agent 3.0 will prevent any emission related DTC’s or check engine light from setting. However, if some other issue comes up you will still be alerted. DTC’s can be checked / cleared.
Fuel Mileage - Expect to see a significant fuel mileage gains. If your DPF is plugged up your probably averaging about 13-14 mpg. More or less depending on the severity of the restriction. After installing the EZ Lynk and deleting the DPF/CAT expect to get a combined mileage of 18-19 mpg. Larger tires and poor driving habits will skew mileage downward.
Return Policy: Since the EZ Lynk is VIN specific custom tuning, there are no returns or refunds.
. Custom programming may take up to 24-48 Hours To Build Tunes. Once your order has been submitted it cannot be cancelled.
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.