You will get your code emailed to the email you provide at checkout.
*ONLY available for 2006 - 2012 Cummins. Dodge Transmission Tuning is VIN Specific and a code must be generated for your specific vehicle.
If you want NAV/DVD unlocks, this is at additional charge ($99) and can be found under the Tuners section. 2006-2012 Dodge Cummins 48/68RFE - Prolong the life of your automatic transmission with H&S's Overdrive Transmission software. This code unlocks the ability to build a custom transmission tune to compliment the engine tuning on H&S Mini Maxx or XRT Pro tuners If you own a diesel engine tuner, chances are that your transmission is being neglected and isn’t compensating for the increase of horsepower/torque, causing premature burnouts and costly repairs (we all know Dodge’s record). One of the biggest complaints about the stock 68RFE transmission is the early shifting. 5th and 6th gears will come in early and cause a "dead pedal" or even a transmission "shudder". These conditions worsen with performance engine tuning, and can cause unnecessary damage to your transmission. H&S modifies those 5th and 6th gear shift points to greatly reduce these annoying problems.
If you are a 2006-2012 Dodge Cummins driver (2500/3500 only), then you’re in luck - the Cummins Overdrive transmission software will do just that. The transmission tuning software is already built-in to your tuner and can be activated simply by purchasing this unlock code. No downloads are required - all the data is already inside your tuner. This code simply unlocks the ability to access it. Tranny Tuning is Custom tailored to mate with H&S engine tuning, the 5.9L Overdrive software includes modified torque converter lock/unlock strategies that will command the TC to lock in 3rd gear under wide open throttle and hold it locked through 4th gear. Light throttle torque converter strategies have also been changed to lock-up sooner, keeping more power directed to the road instead of wasted in heat and friction. Shift points are modified to take advantage of the available horsepower and torque output. On a 2006 Cummins with a stock 48RFE, we have seen 0.2 to 0.3 second quicker 1/4 mile times JUST from the addition of the H&S Overdrive Tuning.
2007.5-2021 DODGE RAM CUMMINS 6.7L | EZ LYNK TUNER WITH GDP TUNING | COMPLETE REPAIR KIT FOR EGR-DPF-DEF WITH UPGRADED PIPE OR EXHAUST SYSTEM AVAILABLE.
MBRP T304 STAINLESS STEEL 4IN EXHAUST IS THE HIGHEST QUALITY EXHAUST SYSTEM EVER BUILT. We carry 2011-2019 Ford Powerstroke 6.7L and 11-15.5 Chevy/GMC Duramax 6.6L. With the P1 Race Parts PRO Series Race Exhaust System. P1 Race Parts PRO Series Race Exhaust System is built from T304 Stainless Steel and comes complete with T304 Stainless Muffler and Tip. OEM style hangers and clamps for an easy installation. Does not rust or oxidize. Made from mirror polished T304 stainless steel (which lasts longer than aluminized exhaust), this kit also comes with a polished stainless muffler and exhaust tip.
Color Of EGR Kits May Vary.
WE CURRENTLY HAVE EZLYNK INSTOCK WITH THE LIFETIME AND 4WEEK LIMITED SUPPORT PACKS.
2010 - 2021 Dodge Ram 2500/3500/4500/5500 Cummins Diesel 6.7L.
2008 - 2019 Ford F250/350/450/550 (650/750 ARE 199$ Additional) Powerstroke Diesel 6.4L & 6.7L.
2011-2016 Chevy 2500/3500 Duramax Diesel 6.6L.
2016-2019 Nissan Titan XD Cummins 5.0 No Egr Kit Available for these titan trucks.
10-21 DODGE RAM 6.7L Hp levels.
Power Levels (Emissions Removed)
10-21 Ram 6.7L
4wk Limited Support Package. Our limited support packs give you access to all tuning compatible with your vehicle for 4 weeks. This is convenient if you’re seeking a single tune to install on your vehicle. Once the 4 week expires the tune that is currently in your truck will remain. Upgrading to Full support will give you access to all tuning and software updates indefinitely.
Full Support Package offers unlimited flashes and basic tune revisions on ALL TUNES. You’ll receive automatic tune updates so that you can take advantage of the progress that we make and enjoy the timelessness of the EZ LYNK AutoAgent.
The SOTF Switch is needed to correctly run SOTF tunes. Without the switch installed, your tune will default to the lowest power level. Installing the switch will allow you to adjust power levels and maximize your vehicle’s performance instantly.
TCM Tuning will increase the line pressure in your transmission so it can keep up with all the added power your engine will be producing from the tunes. We highly recommend TCM tuning to anyone with a 68RFE that plans on running anything more than a tow tune. Please specify if you have any transmission modifications when ordering TCM Tuning!!
2016-2019 Nissan XD 5.0L Cummins Power Levels:
2018-2019 3.0L Powerstroke
Power Levels (Emissions Removed): 11-16 Chevy Duramax.
11-16 Chevy Duraamax
Living up to the brand name, EZ LYNK has made the installation process simple. We’ve broken down each step and provided some valuable information that will help you understand how your AutoAgent works.
Step One: Download & Install the AutoAgent App
Step Two: Create an Account
From the AutoAgent app, select ‘create an account’. You will need to verify that your email address is valid upon creation. Dealers should always create an account for the end-user or use the account that the end-user has already created.
Step Three: Place Your Key in the ‘Run’ Position
Turn your key all the way over without starting the vehicle. This will boot your vehicle’s engine computer allowing the AutoAgent to communicate with it. If you have a push-to-start vehicle, you should press the Start button twice.
Step Four: Plug the AutoAgent into your OBD-II Port
With the key in the ‘Run’ position, plug your AutoAgent into your vehicle’s On-Board Diagnostics port. You can verify that it has booted correctly when you see that a blue and green light are illuminating from the device.
Step Five: Connect to your AutoAgent from your Smart Device
Navigate to the WiFi settings of your smart device and select the ‘EZLYNK_####’ network. A check mark will appear next to the network name when you have successfully connected. The AutoAgent 3 also allows you to connect via Bluetooth.
Step Six: Open the AutoAgent App
After you’ve successfully connected, you can navigate back to the AutoAgent app. You should now be able to see your vehicle gauges.
Step Seven: Lynk your Vehicle
When you purchase from Elite Diesels or an authorized dealer, your vehicle will be AutoLynked. If your smart device has cellular data, you will notice that a message has appeared asking you to lynk the vehicle. Follow these prompts to connect your vehicle with your mechanic/technician. If your smart device does not have cellular data, you will need to connect to an internet available network and re-open the app to complete the lynking process.
Step Eight: Program Your Vehicle
After completing the lynking steps you are ready to flash your vehicle.
Navigate to > Vehicle > ECU Profiles. Here you can view the list of tunes or ECU profiles that are available to you.
Tap the button to download your desired ECU profile, followed by the ‘Install’ button to flash your vehicle. The app will guide you through the flashing procedure.
(When using a smart devices without cellular data you will need to switch to an internet available network to download the ECU profile, then back to the EZ LYNK network to install the ECU profile.)
Power Levels: 0hp up to 200hp+ Depending on truck and modifications.
Includes rotary switch to change power levels on the fly.
Unlock cable - Includes required unlock cable for Nissan pickup trucks.
INCLUDES DPF DELETE PIPE WITH OPTIONAL UPGRADE TO FULL EXHAUST IF NEEDED.
Optional EGR DELETE KIT IF NEEDED.
Diesel Particulate Filter (DPF) - The EZ Lynk is a DPF delete capable tuner. The DPF must be removed when installing the EZ Lynk. DPF Delete Pipe.
Catalytic Converter (CAT) - We recommend doing a CAT delete at the same time as the DPF delete.
Diesel Oxidation Catalyst (DOC) - If equipped, the DOC can be deleted.
Selective Catalytic Reduction (SCR) - If equipped, the SCR can be deleted.
Exhaust Gas Recirculation (EGR) - The EZ Lynk Auto Agent 3.0 will de-activate the EGR system. The EGR valve & EGR cooler can remain installed but unplug from any wiring harness or can be completely removed with an EGR delete kit. We recommend completely removing the EGR system but either option is available.
Diesel Exhaust Fluid (DEF) - 2013+ trucks in stock form require DEF. This will no longer be required when installing an EZ Lynk. The DEF tank can be removed completely or the wiring harness can just be unplugged.
Diagnostic Trouble Codes / Check Engine Light - The EZ Lynk Auto Agent 3.0 will prevent any emission related DTC’s or check engine light from setting. However, if some other issue comes up you will still be alerted. DTC’s can be checked / cleared.
Fuel Mileage - Expect to see a significant fuel mileage gains. If your DPF is plugged up your probably averaging about 13-14 mpg. More or less depending on the severity of the restriction. After installing the EZ Lynk and deleting the DPF/CAT expect to get a combined mileage of 18-19 mpg. Larger tires and poor driving habits will skew mileage downward.
Return Policy: Since the EZ Lynk is VIN specific custom tuning, there are no returns or refunds.
. Custom programming may take up to 24-48 Hours To Build Tunes. Once your order has been submitted it cannot be cancelled.
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.